Features
The Smart Sensing Valve Technology features:
โข On-board custom, slim profile Electronic controller
โข Waterproof IP66 rating
โข Small molded style connectors with easy-routing interconnect cables
โข Direct to Valve 12VDC Power- lossless regardless of switch to valve distance
โข Controller opens or closes valve in under a second
โข Push button triggered, no switch press time dependency
โข High accuracy solid state sensors and feedback control
โข Controller stops motor at precise target position
โข Stainless Steel gearing
โข Vastly improved reliability and precision
โข Lossless reverse polarity protection
โข Power-Up sensing โ Valve homes to โSafeโ closed position at power up
โข Power-on Green LED indicator
โข Protection Seals on 12V power connector and included pigtail
โข Expandability โ easy to add more Valves and switches
โข Adaptable to External controllers and Automation
โข RoHS and Lead Free compliant
Tech Data
KIT PN 6021 TECHNICAL DATA
S3VT VALVE PN 6009-DM10-S3VT
โข 12 V DC, 3โโ Full flow valve
โข On board Electronics Controller with feedback gate position control
โข High accuracy Semiconductor position sensors
โข IP 66 Compliant โ waterproof, sealed electronics
โข Reverse Polarity protected
โข Power-On safe โhomingโ to closed position
โข Operating time: 0.5 sec Typical at 12 V; 0.75 sec max
โข Sensors provide Red (Open), Green (Closed) LED status to operating switch
โข 2 ports for 2 switches (2nd switch option)
โข Port Interface: Waterproof IP66 connector when mated and secured to male
โข Connector Type: Custom molded, 10 mm OD x 37 mm L, 4 pin female, gold plated contacts
โข Screw-on protective cap (included on unused port if applicable)
โข Compatible with 2 types of switches โ for exposed or protected locations
โข Green Power-On LED on the on board controller
โข Back up Active motor safety: Internal timer 0.8-0.85 seconds
โข Voltage range: 10.8 volts โ 14.4 Volts. 12 V Nominal
โข 12V power connector pigtail with seal included
โข Stand by current under 50 ma with 2 switch LEDS active
โข Slim profile, under ยฝโ, on-board controller โ fits tight spaces
โข Internal gearing: 303 Stainless steel, Swiss made
โข Durable ABS, injection molded Valve Body and Parts
โข Manual Override from both sides of valve with 1/8โ Allen key included
โข Easily attached to 3โณ ABS male or female bolt-on flange fittings; Mounting HW included
โข Adaptable to most pipe sizes with proper fittings
โข Special Seals Included
โข Lubricant Dow Corning 111 included
TRIPLE SWITCH PN 5943-EXT
โข Illumination: 2 Switches with Internal Bright RED and Bright GREEN LEDs; 1 Master Switch with Internal Bright RED LED
โข Hole cutout for Triple snap fit housing: 3.050 inch x 1.90 inch (77.5 mm x 48.3 mm)
DUAL SWITCH PN 5963-INT
โข Illumination: 2 switches with Internal Bright RED and SOFT GREEN LEDs
โข Hole cutout Dual snap fit housing: 2.02 inch x 1.90 inch (51.3 mm x 48.3 mm)
All other Technical Specs. are identical to Operator Switches in both PNs and listed below:
โข Mounting: Switches come preinstalled in flush-mount, snap-fit Triple and Dual housings
โข Switch Type: Momentary contact rocker with custom PCB assembly
โข Sealing: Switch to Housing sealed with closed cell gasket; Switch sealed with dual seals around LEDs and rocker stem
โข IP rating: IP66 from front panel
โข Panel thickness : Min: 0.062 inch (1.57 mm) Max: 0.375 inch (9.52 mm)
โข Rear clearance requirement: 1.92 Inch measured from front of panel (Housing seating surface)
โข Interface: 6/4 RJ 11 socket, gold plated contacts, mounted on rear PCB assembly
โข Actuator: Aesthetic symmetrically curved, black nylon
โข Actuating force: 460 grams +/- 30, (4.5 N +/- 0.3)
โข Actuating distance to rocker center: 20 mm
โข Lens โ Dual prismatic, clear polycarbonate set in rocker
โข Operating life: 50,000 cycles min
โข Industry certification: Switch meets MIL Std. 202F, MIL Std. 810C, UL 1500, ISO 8846, IEC 60529 and BS 5490
MASTER SWITCH PN 5890 TECHNICAL DATA (Pre-installed in Triple housing)
โข Sealing: Switch to Housing sealed with closed cell gasket; Switch sealed with seal around LED and rocker stem
โข Rating: 4-14 V DC, 20 Amp
โข IP rating: IP66 from front panel
โข Panel thickness range: 0.062 (1.57 mm) to 0.375 inch (9.52 mm) (Refer Doc DM 114 for details)
โข Rear clearance requirement: โฅ1.92 Inch (48.8 mm) measured from front of panel (Housing seating surface)
โข Connections: 12 V In, 12 V Out (switched), and Ground for power On-LED.
โข Terminals: 1/4โ(6.3mm) Quick Connect, Industry standard
โข Actuator: Aesthetic symmetrically curved, black nylon
โข Actuator Travel: 18 Degrees
โข Lens โ Single prismatic, clear polycarbonate set in rocker
โข Operating life: 50,000 cycles min
โข Certification: MIL Std. 202F, MIL Std. 810C, UL 1500, ISO 8846, IEC 60529 and BS 5490
IP66-2 CABLE DM PN 5955-IP66-2 20โ Rnd. Cable Ass. TECHNICAL DATA
โข Type: AWM Style 2464 Cable
โข Core: 4
โข Wire: 4 x insulated cores, stranded copper, 7/30 per core, 26 AWG, Black Outer Sheath
โข Cable OD: 3.5 mm (0.140 inch)
โข Length: 20 Ft std.; (Custom lengths available)
โข Temp Rating: 60 Deg. C
โข Voltage rating: 150V
โข Controller interface: Waterproof IP66 connector when mated and secured to female
โข Connector Type: Custom molded, 12.9 mm OD x 36.5 mm L., 4 pin male, gold plated contacts
โข Switch interface: 6/4 RJ11 Plug, Gold plated contacts, for stranded copper round wire
Installation
Pro-Series S3VT Valve Kit Installation
Kit installation involves 3 steps โ a) Installing Valve b) Operator switch and cable c) 12 VDC wiring
Use the links below to S3VT Companion Documents
Follow the instructions to complete the installation process
DM101 S3VT Valve Installation
DM102 S3VT Operating Switch and Cable Installation
DM114 Multi-Switch Housing Panel Cutouts and Clearances
DM104 S3VT 12V DC Wiring Diagram
PDF Files open in a new window โ view in browser or save for off-line viewing
or printing
Application
Application information on Pro-Series S3VT valve kits can be determined from: DM103 S3VT Valve Configuration guide
PDF Files open in a new window โ view in browser or save for off-line viewing or printing