“I just had my Sewer Drain System upgraded with a Waste Master Ultimate Sewer Hose system in Hollister, CA. They performed a great custom fit on my 2016 Solitude 300GK. Their craftsmanship and attention to detail is next to none in this category. This will make our hook-ups and stops so much easier as we travel throughout the country…” ~J Gross
The process entails mounting a hose storage enclosure to the I-beam, close to the original sewer outlet. When necessary we redirect the sewer outlet to terminate at the side of the enclosure where we have pre-drilled a hole.
We then insert the Male Cam Loc on one end of the hose into the front door of the enclosure and out through the hole where it connects to the Female sewer outlet fitting.
After the system is installed all you do is open the enclosure door, pull out the sewer inlet nozzle, insert it in the in the ground inlet.
When secure, open the nozzle shut off lever. Then push the Drain Master electronic valve or pull the appropriate handle to dump the tanks; Black first, Gray second. We didn’t change the standard dumping procedure, we just made it simple, sanitary and uneventful!
Installing the Drain Master electronic valves is quite simple, since they easily replace the cable or manual pull valves.
Having a second set of switches inside the RV allows you to dump from inside your coach. This is a real convenience in rainy or cold weather.
Mr. Gross, like so many of our converted customers, cannot understand why this is not a Standard Feature on all RVs from the factory!
Waste Master Ultimate Kit – RV Sewer Hose Storage: CLICK HERE
New Pro-Series Drain Master Electric Waste Valve: CLICK HERE[/av_textblock] [/av_one_full]