Pro-Series S3VT Kit [3 Valves 6007]

Tech Data

KIT PN 6007 TECHNICAL DATA

S3VT VALVE PN 6009-DM10-S3VT

• 12 V DC, 3’’ Full flow valve
• On board Electronics Controller with feedback gate position control
• High accuracy Semiconductor position sensors
• IP 66 Compliant – waterproof, sealed electronics
• Reverse Polarity protected
• Power-On safe ‘homing’ to closed position
• Operating time: 0.5 sec Typical at 12 V; 0.75 sec max
• Sensors provide Red (Open), Green (Closed) LED status to operating switch
• 2 ports for 2 switches (2nd switch option)
• Port Interface: Waterproof IP66 connector when mated and secured to male
• Connector Type: Custom molded, 10 mm OD x 37 mm L, 4 pin female, gold plated contacts
• Screw-on protective cap (included on unused port if applicable)
• Compatible with 2 types of switches – for exposed or protected locations
• Green Power-On LED on the on board controller
• Back up Active motor safety: Internal timer 0.8-0.85 seconds
• Voltage range: 10.8 volts – 14.4 Volts. 12 V Nominal
• 12V power connector pigtail with seal included
• Stand by current under 50 ma with 2 switch LEDS active
• Slim profile, under ½”, on-board controller – fits tight spaces
• Internal gearing: 303 Stainless steel, Swiss made
• Durable ABS, injection molded Valve Body and Parts
• Manual Override from both sides of valve with 1/8” Allen key included
• Easily attached to 3″ ABS male or female bolt-on flange fittings; Mounting HW included
• Adaptable to most pipe sizes with proper fittings
• Special Seals Included
• Lubricant Dow Corning 111 included

WATERPROOF IP 66 DOUBLE SWITCH PANEL: DM PN 5985- RV Dbl Sw Pnl

PANEL

• Type: Flush mount, with 2 switches and custom PCB assembly
• Application: Water prone RV Exterior locations, wet bays or compartments
• Front sealing : Polyester overlay over entire panel including over switches and LEDs
• Edge sealing: Pre-installed gasket seal 0.060 Inch (60mil) (1.5 mm) thick
• Panel Size: 4 Inch (W) x 3 Inch (H)
• Panel Thickness 0.08 inch (80mil) (2mm)
• Material: Aluminum
• Graphics: Digitally imaged color background, legends, insets and outlines
• Panel Finish: Gray frosted with embossed clear window over switch operating and LED zones
• Mounting holes: 0.13 inch dia. x 4, located 0.30 inch x 0.30 inch from corners
• Max mounting panel thickness: 0.269 inch (6.83 mm)
• Rear clearance: 0.80 inch (20.26 mm) measured from front of mounting panel (panel seating surface)

SWITCH

• LED Illumination: High Brightness RED and GREEN LEDs – high visibility in strong ambient light
• Type: Hinged, Tactile, Snap Action
• Switch activation : Through the overlay
• Color: 1 Black, 1 Gray
• Size: 0.7 Inch (H) x 0.5 Inch (W), 18 mm (H) x 12 mm (W)
• Interface: 2 x 6/4 RJ 11 sockets (1 per switch), gold plated contacts, mounted on rear PCB assembly.
• Actuating force: Apr. 4.5 Oz, (130 gm)
• Actuating stroke: 0.016 Inch (16 mil), 90.4 mm)
• Operating life: > 100,000 cycles

DOUBLE SWITCH PANEL: DM PN 5847- RV Dbl Sw Pnl TECHNICAL DATA

PANEL

• Type: Flush mount, with 2 switches and custom PCB assembly
• Application: Dry locations, such as RV interiors
• Size: 4 Inch (W) x 3 Inch (H)
• Thickness 0.08 inch (80mil) (2mm)
• Material: Aluminum
• Graphics: UV ink color legends, insets and outlines
• Panel Finish: Gray Satin Powder coated both sides and edges
• Mounting holes: 0.13 inch dia. x 4, located 0.30 inch x 0.30 inch from corners
• Max mounting panel thickness: 0.269 inch 96.83 mm0
• Rear clearance: 0.80 inch [20.26 mm] measured from front of mounting panel (panel seating surface)

SWITCH

• Illumination: Internal Bright RED and Soft GREEN LEDs unobtrusive in RV interiors
• Type: Hinged, Tactile, Snap Action
• Color: 1 Black, 1 Gray
• Size: 0.7 Inch (H) x 0.5 Inch (W), (18 mm (H) x 12 mm (W))
• Interface: 2 x 6/4 RJ 11 sockets (1 per switch), gold plated contacts, mounted on rear PCB assembly.
• Actuating force: Apr. 4.5 Oz, (130 gm)
• Actuating stroke: 0.016 Inch (16 mil), (0.4 mm)
• Operating life: > 100,000 cycles

SINGLE SWITCHES PN 5787-EXT and PN 5787-INT

• Illumination 5787-EXT: Internal Bright RED and Bright GREEN LEDs
• Illumination 5787-INT: Internal Bright RED and SOFT GREEN LED
All other Technical Specs. are identical for both PN and listed below:
• Type: Flush mount, momentary contact rocker with custom PCB assembly
• Sealing: Switch sealed with dual seals around LEDs and rocker stem
• IP rating: IP66 & IP68 from front panel
• Hole cutout: Industry standard 0.830” x 1.450” hole
• Panel thickness (direct panel mount): Min: 0.030 inch (0.76mm) Max: 0.187 inch (4.75 mm)
• Panel thickness (optional dress plate mount): Max: 1 inch (25.4 mm)
• Rear clearance requirement: 1.92 Inch measured from front of panel (switch seating surface)
• Interface: 6/4 RJ 11 socket, gold plated contacts, mounted on rear PCB assembly
• Actuator: Aesthetic symmetrically curved, black nylon
• Actuating force: 460 grams +/- 30, (4.5 N +/- 0.3)
• Actuating distance to rocker center: 20 mm
• Lens – Dual prismatic, clear polycarbonate set in rocker
• Operating life: 50,000 cycles min
• Industry certification: Switch meets MIL Std. 202F, MIL Std. 810C, UL 1500, ISO 8846, IEC 60529 and BS 5490

IP66-2 CABLE DM PN 5955-IP66-2 20’ Rnd. Cable Ass. TECHNICAL DATA

• Type: AWM Style 2464 Cable
• Core: 4
• Wire: 4 x insulated cores, stranded copper, 7/30 per core, 26 AWG, Black Outer Sheath
• Cable OD: 3.5 mm (0.140 inch)
• Length: 20 Ft std.; (Custom lengths available)
• Temp Rating: 60 Deg. C
• Voltage rating: 150V
• Controller interface: Waterproof IP66 connector when mated and secured to female
• Connector Type: Custom molded, 12.9 mm OD x 36.5 mm L., 4 pin male, gold plated contacts
• Switch interface: 6/4 RJ11 Plug, Gold plated contacts, for stranded copper round wire